76883
Aqua Cast® BLACK is designed for pouring into silicone moulds and is 100% compatible with original Aqua Cast® and Aqua Cast® TEXTURE. Simply add to water, mix and pour.
The guide powder to water mix ratio is 100 : 25 (4 : 1) e.g. 100g powder and 25g water. Aqua Cast® BLACK can be altered to desired viscosity and tailored to the individual application. However, alterations to the guide powder to water ratio of 4 : 1 can affect the cured performance, particularly the drying time and ultimate strength.
PLEASE NOTE Aqua Cast® BLACK has an intense pigment and we strongly recommend wearing gloves and protecting clothing during casting and demoulding. The fine particle size of the powder will leave stains on hands and under fingernails etc. It is advisable to wear gloves and protect your work surfaces to prevent staining. Any residue on the skin or work surfaces can be cleaned with warm water and soap/washing up liquid or cleaning wipes.
If the inside of moulds has a black residue after demoulding, these can also be cleaned using warm water and dishwasher liquid or cleaning wipes.
Any solid can be added, sand, mica, quartzite, dried shards of Aqua Cast® BLACK etc. in small amounts. Excess solids addition weakens the cured strength and can result in the article breaking when being demoulded.
Drying time | Demould in 60-90 minutes For maximum cured strength 24-48 hours |
Mix ratio | 100 : 25 (4 : 1) e.g. 100g of powder to 25g of water |
Pot Life | 10 minutes @ 22°C |
Shelf life | Indefinite when kept dry in storage |
CONNECT WITH US