Loading Images

Hydroflow- Water Based Casting Compound

Hydroflow-76

An environmentally friendly, water based casting compound that comes in two components - a mineral powder and a water based acrylic binder.

-Water based & environmentally friendly
-No harsh chemicals, odourless and VOC-free
-Easily pigmented using resi-TINT inks or other water based pigments
-Perfect for coasters, platters, vases, planters, soap dishes and many other items
-Ideal for creating textured art pieces on canvas and wooden boards
-Can be used to create the terrazzo effect
-Easily sanded to create different finishes
-Mixing containers & tools can be cleaned with water after use
-Can be demoulded in less than 1 hour
-Different Kit sizes available
-Non flammable (internal tests)

Specifications

Mix ratio - 2.5 parts powder to 1 part liquid activator
Drying time - approx. 30 minutes, demould in 1-2 hours, can be sanded after 2 hours
Pot Life - 10-20 minutes
Shelf life - indefinite

A sustainable solution for creating functional & decorative items with a cement texture & appearance. Can be used to make smooth or textured pieces, hydroflow will replicate the most detailed texture in your mould to produce unique jewellery, creative arts and crafts.

It has thousands of uses, limited only by the shape of your mould. Patterns can be created in newly poured pieces using a variety of tools. Easily coloured with water based pigments such as acrylic inks, acrylic paints or powdered tempura paints.

Size	SKU	Price	Quantity
1.75kg Kit (1.25kg powder base + 500ml fluid activator)	76180	~~AED 110.00~~ AED 99.00 - 10% Off
3.5kg Kit (2.5kg powder base + 1ltr fluid activator)	76197	~~AED 165.00~~ AED 148.50 - 10% Off
7kg Kit (5kg powder base + 2ltr fluid activator)	76203	~~AED 260.00~~ AED 234.00 - 10% Off
14kg Kit (10kg powder base + 4ltr fluid activator)	76210	AED 435.00

More Info

Mixing

Adding colour
Use any water based pigment E.g. resi-Tint acrylic inks, acrylic paints or powdered tempura paints. Any solid can be added (sand, mica, quartzite, dried shards of hydroflow etc).

When using the whole kit
Add colour to the hydroflow activator fluid before adding the powder. Add small amounts at a time and mix in stages until you have achieved a lump-free consistency

When using part of the kit
Pour the desired amount of hydroflow activator fluid into your mixing container. Add colour to the hydroflow activator fluid before adding the powder. Add 2.5 times the amount of powder to the fluid activator E.g. if you started with 100ml (100g) activator fluid then you should add 250g powder. 2.5:1 is the default mixing ratio, but this is not set in stone. You can adapt the ratio with less or more powder to obtain a runnier or thicker consistency to suit the application.

Once you have mixed to a creamy consistency you can top up the pigment addition to achieve a stronger colour shade.

Application

Immediately pour into your mould and agitate to clear trapped air bubbles. If it thickens rapidly whilst pouring do not be concerned, simply stir again and it will become the same consistency as before. Allow to harden in 20-40 minutes. The mould will feel warm, this is normal. Demould after 1-2 hrs.

Additional information

can be sanded using either dry or wet/dry sandpaper to expose any terrazzo aggregate
can be acid-etched with white vinegar when using stronger powder concentration, immerse for 30-60 minutes and clean off afterwards
is heat resistant up to 125°C surface contact temperature
is porous and can be sealed by brush using hydroflow sealer or any acrylic/PVA sealer